Flex Eye Instructions

Directions:

1. Be sure to flatten cheeks after filling them.

2. Scoop filler back out of eye socket.

3. Fill eye socket with scrap piece of foam rubber.

4. Align pupil, insert bottom of eye into socket, flex top and the eye can be inserted into socket (the foam rubber works like a spring and pushes eye back outward against eye orbit bone).

5. Place tension wire on socket just below the eye with just enough tension to keep socket in contact.

6. Paint over top of eye to match top of fish' head.

7. After painting, over spray can be cleaned with Q-Tip and lacquer thinner or acetone. Eye will haze but gloss coat will restore shine.

Go Back